Mazda RX7
Drag Setup

Corolla AE86
Circuit Setup

Video
Downloads

wrecord

Contact

This is my RX7 setup for NFSU2 for Drag Racing. I am still testing the setting for improvement.

     

As you can see from the above setup, the RX7 uses only stock suspension.
I only use certain bumper so that it suits my kind of drag race,
feel free to change it to suit you needs.

    

The ECU, Turbo are set to high RPM, NOS is set to 5 for Power.

    

This is my suspension, Tire and Aerodynamic settings. Front aerodynamic is set to weak so that
RX7 will wheelie from starting line.

     

The Drivetrain is setup as above, as you can see the timing is quite tight. Changing of gear from 0 to 3 will be done during wheelie time. Sometime I would make adjustment between 3.88 to 3.97, but now I am used to 3.88

  

These are the timings achieved with the RX7 setup using 3.88 gear ratio in dyno test track and bayview.