2. A needle, and thread matching the ribbon.
3. Small gold rings aproximately the size shown below.
--->
4. Clipping keychain (shown below).
--->
**You can get these at any craft store. They are really inexpensive.
A leash for your Beanie Babies!
The leash is made to fit any of the Beanies.
o Materials:
1. At least 30 inches of one half inch ribbon.o Directions:
2. A needle, and thread matching the ribbon.
3. Small gold rings aproximately the size shown below.
--->
4. Clipping keychain (shown below).
--->
**You can get these at any craft store. They are really inexpensive.
1. Cut the half inch or 3/4 inch ribbon into a 6 and a half piece and an 18 inch piece.
2. With the shorter ribbon fold a half inch piece of one end over, and put one of the gold keychain rings in there. Sew it down.
3. Do the same to the other side.
4. Take the clipping key chain of any color and loop one end of the long ribbon and fold the ribbon over a half inch like before. Sew it down.
5. On the other end of the long ribbon, fold over four inches and sew it down. That makes the handle.
6. Last but not least, hook the clipping keychain onto one side of the small ribbon with the rings. Wrap it around a Beanie Babies' neck and clip the other end of the small ribbon into the mouth of the clipping keychain.
That's it for this time! Hopefully it will turn out for you! If you have any questions, please let me know. Sorry if the pictures aren't very clear, it's the best my black and white scanner could do. :)
NOTE: Everyone is welcome to print this, but it is under copyright to myself so there is to be no distribution of this or anything related to this or ANY other patterns. If you find someone who is doings so, please report them to me.
This page hosted by Get your own Free Home Page