![]() |
There will be some tools needed and some parts. Remember, this project is designed to keep costs down as low as possible. Also, the tools to be used will be what is here. -------------------------------------------------------------- Let's begin with the tools first. Then, the parts second. |
Tool list |
One Drill with a 3/8 chuck. 1/2" drill bit. 7/32 drill bit. No. 43 drill bit. No. 40 Tap. 4-40 NC fine thread. No. 40 Screws. 16 of these to secure the transistor to the heatsink. And 4 to securd the board to the heatsink. Dremel Tool and assorted bits. Jig saw with a fine tooth blade. Solder gun and a solder pencil. Rosin core solder. .062 60/40 will work. Razor blade or sharp cutting knife. Wire cutter. Files. A small chain saw file will work very well. A fine half round and flat combo file. A pencil with a sharp point. A ruler. |
Parts list |
![]() |
![]() |