IMPULSE WEAR paid royalties for the reproduction and registered the international copyright.

any kind of reproduction is strictly forbidden.

(we remember that even a single reproduction will be followed by a complaint for tax evasion and violation of copyright.)

as the range of designs are enormous Link to catalogue

You can request a copy of the catalogue sold at € 10.00

The following designs are examples, in each package there are 12 pieces with the same design.
prices change according to dimension and kind .

transfers to be printed on clear garments

transfers to be printed on any color also on black garments

puff transfers

puff transfers embroidery applied with hot-adhesive

You can print on cotton, polyester, lycra, leather etc provided that they are resistant to 200°C and that they are not treated with anti-adherent products (silicones, Teflon, wax, paint )
you can add decorous writings near the designs, but they must remain in the way they were conceived by the author.

PREPARE YOUR PRESS :
temperature 190-200°c
time setting 8-10 sec
very strong pressure, about 600 gr. cm 2
it is the equivalent of 1 ton on a worktable of 38x45 cm
the lower plate of the press should be lukewarm 40-60° (close the press without garment once, before printing)
if you have to print on light t-shirts (less than 160 gr. m2) insert an additional fabric or another T-shirt on the press.

APPLICATION
Lay the T-shirt on the plate of the press
close the press for 8-10 seconds strong pressure without transfer
lay the transfer on the warm surface
close the press again with strong pressure for 8-10 seconds. peel while hot immediately: you have one second of time.
mind you do not burn your hands !!

TRANSFERS WITH EMBRODERY
as above, but set time from 12 to 18 seconds

TRANSFERS FOR DARK GARNMENTS
as above, but set time from 5 to 8 seconds

Wash T-shirt inside-out at 40 degrees by hand or in the washing machine at 30 degrees (delicate cycle.)
Iron inside-out at lukewarm temperature

We take no responsibility for any mistakes during application .
the duty of the manufacturer is to replace the goods which are considered faulty.

General Sales conditions