transmitter: Hitec Flash 4 4-channel.
Also, the receiver included with the transmitter was used. |
|
| 1st speed controller for the outer 2 motors. |
1 Power mos 56 from Graupner.(order.nr.:3283) |
| 2nd speed controller for the middle motor. |
1 mini switch 40 from Graupner (order.nr.:3294) |
| 3rd speed controller, for the bow motor. |
1 Power mos 16 from Graupner (order.nr.:2861) |
| 1st Motors, for the outer jets. |
2 Speed 700BB turbo's 12v from Graupner (order.nr.6317) |
| 2nd motor for the middle jet. |
1 Speed 700BB turbo 9.6v from Graupner (order.nr.3307) |
| 3rd Motor, the bow motor. |
1 Speed 400 7.2v from Graupner (order.nr. 1794) |
| 1st Servos, for actuating the reverse valves. |
2 hitec HS300 servos wired in series. |
| 2nd Servo, for steering the boat. |
1 Hitec HS 300 servo |
Total nr. of cells: 46, + 1 battery pack for
the receiver. |
2x14 cells for the outer 2 motors, 2x 6 cells for the middle motor,
and 1x6 for the bow motor. |
In the future, the 46 cells are to be replaced by 1 or 2
lead gel cells. The advantage of these are prolonged run times, better stability,
and the possibility to power lighting, instead of having to include yet another
battery pack for this.
The disadvantage of it is that because of the weight the speed will decrease
slightly, but it'll still be fast enough.
Futhermore a sound module is planned to be installed, which will make the boat
even more realistic.
