Not quite finished, but ready to roll! Rob's holding a temporary throttle pot in his hand, with wires running down to the Curtis controller.

Rob will later fabricate a pot box to be mounted inside the hollow frame, cable-operated from a non-indexing left-side thumb shifter which will be mounted inverted on the right side of the handlebar (next to the twist-shifter for the Sachs internal hub). The chain from the pedals to the 7-speed cassette will be fitted once I've fabricated a mounting bracket for the derailleur required to keep it properly tensioned and allow gear changing to match pedal speed/effort to the vehicle speed.

---

This page hosted by   Get your own Free Home Page