a.) Whole VDT/TV Scrap – Whole VDT/TV Scrap shall consist of whole assembled computer monitors, video display terminals (VDT) and television sets suitable for dismantling (uncrushed/broken). Suitable for CRT (Cathode Ray Tube) recovery.
b.) CRT Scrap – Scrap whole or broken Cathode Ray Tubes, may contain cores & windings but must be free of metal & plastic frames.
c.) 1/8 inch Recovered CRT Glass – Recovered CRT Glass shall consist of Cathode Ray Tube Glass processed and sized to minus 1/8"(inch). Must be free of cores, metal windings and other foreign materials.
d.) 3/8 inch Recovered CRT Glass – Recovered CRT Glass shall consist of Cathode Ray Tube Glass processed and sized to minus 3/8"(inch). Must be free of cores, metal windings and other foreign materials.
e.) CRT Tailings – CRT Tailings shall consist of CRT processing rejects and may include screens, cores, coils, windings and residual metal from gun remnants.
FLUORESCENT LIGHT RECYCLING
a.) Whole Scrap Fluorescent Light Bulbs – Whole Scrap Fluorescent Light Bulbs shall consist of whole/unbroken fluorescent light bulbs packaged for secure transportation for recovery purposes.
b.) Assorted Broken Fluorescent Lights – Assorted Broken Fluorescent Lights shall consist of mixed or assorted fluorescent light bulbs. May be broken or damaged but must be containerized properly for secure transportation and handling.
c.) 1/8 inch Fluorescent Bulb Glass – 1/8" Fluorescent Bulb Glass shall consist of processed fluorescent bulb glass sized to minus 1/8"(inch). Oversized metal components must be removed. All materials must be containerized securely.
d.) Scrap Fluorescent Bulb Tailings – Scrap Fluorescent Bulb Tailings shall consist of rejects from fluorescent bulb processing and may include bulb ends/contact points.
e.) Scrap Fluorescent Light Ballasts – Scrap Fluorescent Light Ballasts shall consist of whole electrical ballasts from fluorescent lights
FIBERGLASS RECYCLING
a.) Mixed Fiberglass Scrap – Mixed Fiberglass Scrap shall consist of assorted scraps or trimmings rigid resin filled fiberglass materials.
b.) Fiberglass Insulation Scrap – Fiberglass Insulation Scrap shall contain assorted insulation materials constructed of a fiberglass content. May be laminated to paper, textile or foil backing.
c.) SMC BMC Scrap – SMC BMC Scrap shall consist of assorted fiberglass reinforced Sheet Molded Compound (SMC) of Blow Molded Compound (BMC) scrap. May include automotive body components.
d.) Printed Circuit Board Scrap – Printed Circuit Board Scrap shall consist of base circuit board materials or trimmings containing resin filled fiberglass. May not contain metal, (all metal content materials should be sent for metal recovery).
e.) Recovered Epoxy/Polyester Resins – Recovered Epoxy/Polyester Resins shall consist of cured Epoxy/Polyester Resins recovered from a fiberglass recovery system, will all bulk glass fibers removed and the recovered resin material sized to minus 40 meshes.
Section I: Introduction
Section II: Present (YOU ARE CURRENTLY IN THIS SECTION)
Section III: Future
Complete Table of Contents
Reference