| BOARDHOLDER MATERIAL LIST ALL ITEMS SHOULD BE AVAILABLE AT YOUR LOCAL LUMBER YARD OR HOME IMPROVEMENT STORE |
| REQUIRED 1 SHEET 3/4 INCH PLYWOOD 48” X 30” 1 TUBE “LIQUID NAILS" OR SIMILAR CONSTRUCTION ADHESIVE 4 EYE SCREWS 1/4 INCH BY 2 INCHES LONG OR SIMILAR ITEM 2 HANDLES (“STANLEY” 6.5 INCH DOOR PULLS OR SIMILAR ITEM) 2 18 INCH BUNGEE CORDS 60 1 1/2 INCH WOOD, DECK, OR DRYWALL SCREWS 1 8 FOOT 2” X 2” (OR YOU CAN RIP CUT AN 8 FOOT 2 4 LENGTHWISE) |
| OPTIONAL 2 ADDITIONAL HANDLES 12 CORNER BRACES (2.5 INCH OR SIMILAR ITEM) 2 3/4 INCH PLYWOOD “STIFFENERS” 6” X 24” 2 SLOTTED STEEL ANGLES 2 FEET LONG 2 LOTTED STEEL ANGLES 6 FEET LONG 2 2 FOOT 3/8 INCH STEEL RODS |
| CUTTING INSTRUCTIONS (HINT: UNLESS YOU HAVE A TABLE SAW OR OTHER PROPER EQUIPMENT SAVE YOURSELF TIME AND THE POSSIBILITY OF ERRORS BY HAVING THE STORE CUT THE PLYWOOD) 1. CUT PLYWOOD PIECES AS PER THE “CUTTING DIAGRAM”. 2. CUT THE 2” X 2” INTO EIGHT 7.25 INCH LENGTHS. THESE WILL BE THE “CLEATS’. |
| TOOLS REQUIRED VARIABLE SPEED REVERSIBLE ELECTRIC DRILL WITH DRILL BITS AND SCREWDRIVER BITS CIRCULAR SAW OR T ABLE SAW CAULKING GUN FOR CONSTRUCTION ADHESIVE IF “SQUEEZE” TYPE TUBE CANNOT BE PURCHASED |
 |