|
MAZZAGLIA TOOLS |
|
Rib Shaping Tools |
|
ITEM # RP05 Rib Radius Plane Rounding over your ribs is fast and easy with this molding plane. Just measure the originals, glue them on the board, and with a few quick passes, the ribs are done. Virtually free of chatter marks. (Easy to use). Hand Made from choice hardwood with an oil hardened tool steel cutter iron. Comes with instructions $125- |
|
ITEM # RH06 Rib Height Gauge Measure your original rib height quickly and (parallel to the board) for documentation, then use it as a feeler gauge to see when you've planed to the correct height. Virtually Indestructible! Very comfortable to hold and use. Gauge $40- |
|
ITEM # RC04 Rib Crowning Jigs Mount these on a table and crown your ribs using a hand router and template guide. Just clamp a rib in the jig using standard C-clamps and then a quick pass with the router and it's done. Made of tough plywood with capped runners for wear resistance, they are 60" long. Available in 5/16 or 7/16 crown $250 each--Plans available for $25- |
|
ITEM # RS01 Rib Scooping Patterns Made from 1/8" Brass stock. The set contains two patterns, one with a gradual slope for most ribs and one with a steep slope for the higher ribs. Set $55- |
|
ITEM # ST03 Crown Standards Use these to check crown, make presses, fixtures,etc. Available in 5/16"-7/16" and 9/16" crown, measured over 6 feet. These are 1/2" birch multi laminated plywood, 60" long approx.-4" wide shaped convex on one edge and concave on the other. $70- each |
