Vehicle
Source: www.military.com

BMP-1 Armored Personnel Carrier

Function: Soviet Union's first tracked Armored Personnel Carrier.

Description: The BMP-1 is a tracked, amphibious, fully enclosed armored personnel carrier armed with a 73mm smoothbore cannon, one 7.62mm coaxial machine gun and the AT-3 SAGGER antitank guided missile (ATGM). The BMP-1 represents a significant improvement over the wheeled BTR series in all aspects, including mobility, firepower, and survivability. Fielded in 1966, the BMP-1 has been modified to serve as a common chassis for a number of additional vehicle types. No longer in production, the BMP-1 has been surpassed by the BMP-2 and 3 in both service in the Russian army as well as export abroad.

BMP-2 Armored Personnel Carrier

Function: Improved version of the BMP-1 Armored Personnel Carrier.

Description: The BMP-2 is essentially an improved version of the BMP-1, incorporating a more powerful 300 horsepower engine, a 30mm cannon instead of the 73mm smoothbore cannon and the AT-3 SAGGER has been replaced by the AT-4 SPIGOT or the AT-5 SPANDREL (NATO designation.) Additionally, the turret has been enlarged slightly, which has reduced the number of infantry hatches on the back deck from four to two. Squad size has also been reduced on the BMP-2, going from eight to seven passengers. The BMP-2 comes equipped with smoke grenade launchers and has the capability of producing vehicle generated smoke through the engine. Like the BMP-1, the BMP-2 is fully amphibious, propelling itself through the water via track motion.

BMP-3 Armored Personnel Carrier

Function: Soviet Union's latest tracked Armored Personnel Carrier.

Description: The BMP-3 is, in effect, a light tank capable of transporting an infantry squad. Representing a complete departure from the previous BMP-1/2 designs, the BMP-3 mounts a 100mm cannon, 30mm cannon, a cannon launched anti-tank guided missile and a 7.62mm machine gun. In addition, the automotive characteristics have been improved, with the introduction of a 500 horsepower diesel engine, giving the 18 ton vehicle performance similar to the American Bradley Infantry Fighting Vehicle (IFV). The hull of the BMP-3 is more similar to the new BMD-3 airborne personnel carrier, with the low, flat turret mounted in the center of the hull. As with the BMP-1/2, the BMP-3 is fully amphibious, relying on two rear mounted water jets for propulsion. The BMP-3 also incorperates another two 7.62mm machine guns mounted in the bow of the hull.

BTR-60 Armored Personnel Carrier

Function: Soviet 1950 era wheeled APC.

Background: Introduced in 1963 as a replacement for the fully tracked BTR-50, the BTR-60 represents the first of a series of 8x8 wheeled APC that are still in production in the former Soviet Union. In terms of numbers produced, the BTR-60 was the most important vehicle in the Soviet Army and was issued to the Soviet naval Infantry. In addition, the BTR-60 has been supplied to most Warsaw Pact countries in addition to North Korea. The BTR-60 has also been manufactured in Czechoslovakia and Poland.

Initial BTR-60s were equipped with a single 12.7mm DShK machine gun and two PKT 7.62mm machineguns, all mounted forward of the personnel compartment. Later models used the standard Warsaw Pact APC weapons turret equipped with one KPV 14.5mm machine gun and one PKT 7.62mm machine gun. Power is supplied to all eight wheels by means of a unique twin engine/transmission arrangement. The BTR-60 uses two V-8 90hp gasoline engines and two separate transmissions; one supplies power to the 1st and 3rd axles and the other supplies power to the 2nd and 4th axles.

The BTR-60 is fully amphibious and does not require any preparation time. Steering, both on land and in the water, is provided by the forward two axles, which are also power assisted. Water propulsion is provided by a single rear mounted water jet.

Although the BTR-70 began to replace the BTR-60 in 1978, the BTR-60 has never been retired, and continues to serve in Russian reserve formations and numerous countries world-wide.

Description: The BTR-60 an all-wheeled 8x8 fully amphibious armored personnel carrier. The boat shaped vehicle is divided up into three sections: crew compartment, personnel compartment, and engine compartment. In early versions the personnel compartment is open topped; in later versions the entire vehicle is fully enclosed. The BTR-60 may be readily distinguished from the later 70/80/90 series by the presence of a single "automotive-type" muffler exhaust located on either side of the hull rear.

The BTR-60 "P" and "PA" variants are equipped with a single 12.7mm DShK machine gun and two PKT 7.62mm machineguns. These MGs are mounted forward of the personnel compartment, and require the gunners to be exposed while firing. Because of the size of the gunner's position, only two of the three MGs can be manned at any given time. The "PB" model is equipped with a small, one man, turret, mounted over the second axle that contains one KPV 14.5mm machine gun and one PKT 7.62mm machine gun.

In all models, the personnel compartment can only be accessed from the roof of the carrier. There are three infantry mounting steps on each side of the vehicle, mounted between the road wheels, and three additional mounting rails located on the hull above the steps. There is a large personnel compartment access hatch located on each side of the hull.

BTR-70 Armored Personnel Carrier

Function: Soviet 1970-era wheeled APC.

Background: Introduced in 1978 as a replacement to the BTR-60, The BTR-70 is very similar externally to the older vehicle, as many if the improvements made to the vehicle are internal.

The BTR-70 uses the standard Warsaw Pact APC weapons turret equipped with one KPV 14.5mm machine gun and one PKT 7.62mm machine gun. As with the BTR-60, power is supplied to all eight wheels by means of a unique twin engine/transmission arrangement. The BTR-70's power plants, however, have been upgraded to two 120hp gasoline engines. The gearbox arrangement, however, remains unchanged; one supplies power to the 1st and 3rd axles and the other supplies power to the 2nd and 4th axles.

The BTR-70 is also fully amphibious and does not require any preparation time. Steering, both on land and in the water, is provided by the forward two axles, which are also power assisted. Water propulsion is provided by a single rear mounted water jet.

Though replaced by the BTR-80 in the early eighties, the BTR-70 continues to serve in many armies world-wide, including most former Warsaw Pact as well as many Middle Eastern, African, and Asian countries.

Description: The BTR-70 an all-wheeled 8x8 fully amphibious armored personnel carrier. The boat shaped vehicle is divided up into three sections: crew compartment, personnel compartment, and engine compartment. In the case of the BTR-70 the hull has been lengthened somewhat and the axles now have a paired appearance, with a distinctive gap between the second and third axles.

The BTR-70 may be readily distinguished from the 60 and 80 series by the presence of a single, large, curved "caterpillar" insulated exhaust located on either side of the hull rear. In addition the amphibious operations trim vane has been moved from underneath the nose of the vehicle, BTR-60 series, to on top of the nose, just forward of the driver's station.

The BTR-70 is equipped with the standard Warsaw Pact APC turret. The small, one man turret is mounted over the second axle and contains one KPV 14.5mm machine gun and one PKT 7.62mm machine gun.

The personnel compartment can be accessed by a triangular doorway located between the second and third axles. The three infantry mounting steps and the three additional mounting rails located on the hull above the steps, present on the BTR-60, have been eleminated. The large personnel compartment access hatches located on each side of the hull have also been eliminated and replaced with three firing ports.

M1 Abrams Tank

Function: Main battle tank (MBT).

Description: The M1 has a very angular appearance, reflecting the modular nature of its armor components, with the turret mounted centrally on the hull. The M1 has a crew of four. The driver sits centered in the hull and forward of the turret, while the loader, gunner and tank commander occupy the turret, with the loader situated to the left of the main gun and the gunner and tank commander sitting in tandem on the right side. The driver's hatch has three periscope vision blocks which provide for forward vision. The center vision block may be removed and replaced with an AN/TVS-2 low-light periscope. The engine is mounted in the rear of the vehicle with the exhaust coming out from a louvered grill centrally mounted in the rear of the hull. The M1 utilizes a torsion bar suspension with seven pairs of cast aluminum road wheels and two return rollers. The drive sprocket is to the rear, an idler compensation wheel is located forward, and there is a gap between the first and second pair of road wheels. The M1 has armored skirts running the full length of the track. M1 track is made up of vulcanized rubber blocks (M156 variety) or removable rubber pads (M158.) The turret is also angular in appearance, with the main gun mounted in an exposed mantlet in the center of the turret face. The M68 rifled cannon is equipped with a metal thermal shroud, a bore gas evacuator located two-thirds of the way down on the barrel, and is equipped with a Muzzle Reference System collimator on the muzzle itself. The M240 coaxial (COAX) machine gun is located to the right of the main gun, with the flash tube extending through the main gun mantlet. The Gunner's Auxiliary Sight (GAS) aperture is located below the COAX flash tube on the right side of the main gun. The M1 has two turret access hatched, mounted side by side, in the middle of the turret roof. The loader's hatch, located on the left side, is equipped with a pintle mounted M240 7.62mm machine gun. The hatch itself is equipped with a single vision periscope on a rotating base. When not in use, the drivers AN/TVS-2 sight may be used in the loader's hatch vision block. The tank commander's hatch is ringed by vision periscopes and the Commander's Weapon Station cupola is equipped with an M2 HB caliber .50 machine gun. The M2 may be fired while the commander is "buttoned up" but the commander must be exposed to reload the weapon. The CWS can be reconfigured to fire an M240 as a replacement weapon. The Gunner's Primary Sight (GPS) is located forward of the commander's cupola. The GPS is housed in an armored box with hinged doors shielding the optics when not in use. The GPS is divided into two halves; a clear glass window for normal daylight viewing and an IR transparent Germanium coated window for the thermal imaging sight. The Laser Range Finder (LRF) is fired through the daylight window. There are individual sponson boxes located on either side of the turret for equipment storage. These boxes are approximately three feet (1m) long and are bracketed by a three-rail cargo rack which runs the length of the turret side. The smoke grenade launchers are located on either side of the turret, forward of the turret sponson boxes. There are mounting points for two radio antennae, one on either side of the turret rear, and the cross wind sensor is mounted upright in the center of the turret rear. A cargo bustle rack is mounted on the rear of the turret and runs the length of the turret rear (in early production M1s this rack was omitted and a fabric cargo net mounted in it's place. An Auxiliary Power Unit (APU) may be mounted in the turret bustle rack or on the rear of the hull.

History: Fielded in February 1980, the M1 General Abrams main battle tank revolutionized armored warfare. Incorporating an advanced shoot-on-the-move fire control system, a thermal imaging sight, a 1500 horsepower gas turbine engine and an advanced armor design similar to the Chobham armor developed in England, the M1 was the most lethal armored vehicle in the world. Conceived in 1971 as a replacement for the aging M60 tank, which was itself an extension of the 1050s era M 47/48 program, the M1 was going to be of a completely new design, establishing a new family of American main battle tanks. Providing the Abrams with a true shoot on the move capability, the fire control system automatically corrects for range, turret slew (motion) rate, crosswind, and tank axial tilt (cant). In addition, the gunner manually enters ammunition or weapon type, air and ammunition temperatures, barometric pressure, and gun tube wear, while range is instantly calculated by a Nd:YAG (Neodymium doped Yttrium Aluminum Garnet) near infrared laser rangefinder. Lastly, the gunner can compensate for gun tube deformation (caused either by heat generated from firing the cannon or atmospheric changes) through the use of a muzzle reference system, which allows for a rapid realignment of the cannon and the gunner's primary sight.

The Chobham armor built into the M1 represents a veritable leap in armor technology. Composed of layers of metal, ceramics, and spaces, this new armor is far superior to RHA (Rolled Homogeneous Armor) in defeating kinetic and chemical energy weapons. To increase crew safety and survivability, all of the M1's ammunition is stored in armored compartments which are designed vent dangerous gasses and fragments away from the crew in the event of an ammunition explosion. The crew and engine compartments are equipped with an automatic fire suppression system, utilizing numerous fire detection sensors and pressurized Halon gas, which can react to and suppress a compartment fire in less than 250 ms.

To survive on the NBC (Nuclear, Biological, Chemical) battlefield the M1 is also equipped with both an over pressurization and air sterilization system which will protect the crew from these hazards and allow them to continue combat operations without having to wear protective overgarments and masks while buttoned up inside the vehicle.

Lastly, the M1 was the first land combat vehicle to utilize a gas turbine multi fuel engine, which offers a higher power to weight ratio than any other contemporary tank power plant and gives the Abrams unparalleled tactical mobility and cross country speed. The M1 retains the M68 105mm rifled cannon used on the M60 series tanks, which was originally based on the British M7 105mm cannon design, and is capable of firing both rifled and fin stabilized ammunition. In addition, the M1 is equipped with two M240 7.62mm machine guns; one mounted coaxially with the main gun and fired by gunner, and the other mounted at the loader's station. The Commanders Weapon Station (CWS) is equipped with an M2 heavy barrel Caliber .50 machine gun. The CWS can be reconfigured to fire the M240 machine gun as a substitute.) The M1 is equipped with a pair of M250 red phosphorus smoke grenade launchers and is capable of generating smoke by injecting diesel fuel into the engine exhaust.

Originally designated the XM1, the first production model was designated the M1, of which 2,374 were built between 1982 and 1985. In 1984 the M1IP (Improved Product) was introduced, which was outwardly identical to the M1, but which incorporated a number of internal automotive, electronic and armor improvements. Production of the M1IP was halted at 84 tanks in 1986, when the Lima and Detroit tank plants were reconfigured to produce the up-gunned 120mm M1A1. In 1992 a study was conducted evaluating the feasibility of upgrading the Army's fleet of M1s to M1A2 SEP (Standard Equipment Package) standard and low rate production was approved in 1994. Since then the Army had agreed to convert 547 M1s to the M1A2 SEP standard.

M1A1 Main Battle Tank

Function: Main battle tank (MBT).

Description: The M1A1 is an improved version of the M1 Main Battle Tank (MBT). It includes a 120mm smoothbore main gun, an NBC overpressure protection system, improved suspension and powertrain and an improved armor package. In 1988 the M1A1 design was further improved by the addition of depleted uranium (DU) to the tank's armor matrix. M1A1s assigned to the Marine Corps' tank battalions were further modified to include a Position Location Reporting System (PLRS) as well as a Deep Water Fording Kit (DWFK.) As with all tanks in the M1 line, the M1A1 utilizes a 3x-10x primary sight with both ambient light and thermal (infra red) capabilities which allow the gunner to acquire, identify and engage targets in all weather conditions and at ranges out to 2.5 miles. Furthermore, crew safety is enhanced by storing all main gun ammunition in an armored compartment with specially built "blow out" panels which will redirect explosive energy away from the crew in the event the ammunition is damaged.

M1A2 Tank

Function: Main battle tank (MBT).

Description: The M1A2 is externally very similar in appearance to the M1A1 with the exception of the redesigned Commander's Weapon Station (CWS) and the Commander's Independent Thermal Viewer (CITV.) The powered cupola has been replaced with a manually operated anti aircraft pintle mount, which cannot be fired while the commander is "buttoned up." In addition, the hatch has been enlarged and the vision blocks have been enlarged, improving visibility. The CITV is mounted in an armored rotating cylinder on the turret access plate forward of the Loader's station. The CITV is tall enough to limit the effectiveness of the loader's M240 machine gun through its forward arc of fire.

History: Approved for production in 1990, the M1A2 represents a technological improvement of the basic M1A1 design. Outwardly similar in appearance to the M1A1, the most notable exterior changes on the M1A2 are the redesigned Commander's Weapon Station (CWS) and the addition of a Commander's Independent Thermal Viewer) on the left side of the turret forward of the loader's hatch. Internally, however, the M1A2 has been radically redesigned to take advantage of newer technology. Most notable of these improvements is the addition of the Inter-Vehicle Information System (IVIS.) The IVIS system allows for the automatic and continual exchange of information between vehicles. By incorporating information provided by an on board Position/Navigation (POSNAV) system, unit commander's can track the location and progress of subordinate elements automatically, without tasking vehicle crews. In addition enemy positions can be identified, plotted and disseminated, while reports and artillery requests can be automatically formatted, transmitted, and processed. Lastly, map graphic control measures and operational orders can be rapidly distributed via the IVIS system. To ensure information security, all IVIS data transmissions are routed through the M1A2's SINCGARS radio system. Improving on the "hunter-killer" tank commander-gunner target hand off method pioneered on the German Leopard II, the M1A2 takes this a step further by providing the Tank Commander with an independent thermal sight. This CITV sight allows the commander to independently scan for targets in all weather conditions and through battlefield obscurants. In addition to IVIS and the CITV, the M1A2 incorporates a number of additional electronic upgrades. Power distribution throughout the tank has been improved, relying on multiple bus paths so that in the event one conduit is damaged, power may still be delivered to a component via an alternate path. The driver's instrument display has been upgraded to a more detailed digital display and the Gunner's Primary Sight has been stabilized in two axes for increased accuracy.

Approved for implementation in 1995, the M1A2 SEP (System Enhancement Package) is a technology upgrade and standardization program, whereby the Army's fleet of M1s and M1A2s will all be brought to a common standard. Most notable among the modifications will be the introduction of a standard under armor auxiliary power unit and the addition a crew compartment air conditioning and cooling unit. Other modifications within the vehicle will include upgrades to the IVIS system (color display, full size keyboard, digital mapping and graphics generation capability, and voice recognition capabilities), upgrades to the Gunner's Primary Sight assembly, and improvement in the tank's intercom and radio communications systems. Production of the M1A2 was halted after the initial run of 627 vehicles. As part of the fleet upgrade program, 547 of the Army's current inventory of M1s are being upgraded to M1A2 SEP standards, which will require the complete remanufacturing of the turret, while the current fleet of M1A2s will undergo a retrofit to bring them up to SEP standards.
The M1A2 is currently available for export, albeit with a different armor composition and communications package. Saudi Arabia has purchased 312 M1A2s, equipped with British Jaguar radios, and Kuwait has purchased 218 similarly equipped M1A2s.

T-55 Main Battle Tank

Function: Soviet front line MBT during the 1950s.

Background: Introduced in 1949, the T-54/55 is in service with more countries world-wide and in greater numbers than any other tank manufactured since World War II. The first new tank of the post-World War II Soviet Union, the T-54/55 can trace its lineage back to the IS series Stalin heavy tanks and the revolutionary T-34 medium tanks.

The T-54 entered production in the Soviet Union in 1947, and was fielded with Soviet ground forces in 1949. By 1958, the T-54 had undergone a number of improvements and modifications and was re-designated the T-55. The T-55 represents an evolution of the T-54 rather than a completely new design.

The T-55 was produced by the Soviet Union through 1981. In addition, the T-55 was also produced in China (where it was designated the Type 59), Czechoslovakia, and Poland. The T-55 is capable of fording to a depth of 1.4m without modification and to 5.5m with the addition of a snorkel kit. The T-55 is capable of producing onboard smoke by injecting vaporized diesel fuel directly onto the engine exhaust.

Though time and technology have rendered the T-55 obsolete as a front-line main battle tank, large numbers of 54/55s remain in service with militaries world-wide. The T-55 saw service in Hungary in 1956, Czechoslovakia in 1968, and in Syria in 1970. In addition, it was the main battle tank used by the Arab forces during the 1967 and 1973 Arab-Israeli wars. During the 1970s the T-54/55 also saw extensive use during the border wars in Africa. Since so many T-54/55s remain in service, many countries, such as Israel, Pakistan, and India offer upgrade packages to rebuild existing tanks using more modern, and in many cases Western, fire control components, thus extending their usable life even further.

There are currently seven production models of the T-54/55, and more than a dozen variants.

Description: The T-54/55 tank follows a conventional layout, with a dome-shaped turret centrally located on the hull and the engine mounted in the rear. The 54/55 has a crew of four; driver (located in the left hand side of the hull, forward of the turret) loader (right hand side of the turret) tank commander and gunner (both located on the left side of the turret.

The T-54/55 can be identified by the distinct gap between the first and second of its five large cast road wheels. The 54/55 uses steel track (this may be substituted for padded track in modified versions), a torsion bar "live track" suspension with no return rollers and a rear mounted drive sprocket. The T-55 does not use armored fuel cells. Instead, the fuel is stored in exposed tanks on the track fenders. The engine exhaust is expelled out the left rear side of the hull.

The 100mm cannon is centrally mounted in the turret. The cannon trunions are not protected by an armored mantlet, but rather a canvas sleeve that protects the mechanism from the elements. There is no fume extractor on the T-54, while the T-55 has a bore evacuator mounted on the muzzle of the gun.

There are two hatches on the top of the turret (loader's and tank commanders.) Both hatches open forward. In the T-54 the 12.7mm DShK AA MG is mounted in the commander's station; on the T-55 ("A" version and beyond) the machine gun is located in the loader's position.

Two infantry support rails (one straight, one curved) are affixed to the turret sides. These may be removed to accommodate ERA, APS or applique armor packages. If present the main IR searchlight will be mounted on top of the turret (to the left of the gun.) An additional searchlight may be mounted on the commander's hatch. If present, the laser rangefinder will be mounted externally on the top of the main gun itself.

Because the T-55 does not use synchronized optics for the main gun, another identifying characteristic of the T-55 is the large sighting oval on the left hand side of the turret next to the gun mantlet. The aperture on the right hand side of the turret is the firing port for the coaxial PKT-T machine gun.

T-62 Main Battle Tank

Function: Soviet front line MBT during the 1960s.

Background: The T-62 was introduced in 1961 to replace the T-55 as a Soviet front line main battle tank. In many respects, the T-62 represents a product improvement upgrade of the T-55; the T-62 uses the same 580hp V-12 diesel engine, the track, suspension, and drive train arrangement are essentially the same. The initial-run T-62 also shared the same NBC protection system and active infrared gunner's sight as the T-55. The T-62 uses the same fording components as the T-55 and is capable of fording to a depth of 1.4m without modification and to 5.5m with the snorkel kit. The T-62 is capable of producing onboard smoke by injecting vaporized diesel fuel directly onto the engine exhaust.

The T-62's real improvement lay in its 115mm smoothbore, high velocity cannon. With a muzzle velocity of over 1,600m/s, the T-62 has a nearly flat trajectory through its entire effective range, making the gun very accurate. Later production models incorporate a true NBC filtration/over-pressurization system, thus eliminating the need for the crew to wear protective masks while inside the tank, as well as a passive IR gunner's sight which eliminated the need for active infrared search lights which would reveal the location of the illuminating tank.

Although the Soviet Union ceased production of the T-62 in 1975, the T-62 still remains in front-line service with a number of countries world-wide.

Description: The T-62 is similar in appearance to the T-55. The T-62 uses the same "live track" design as the T-55. There are 5 large cast road wheels, with a distinctive gap between the third and fourth and the fourth and fifth road wheels. The track is all steel, the idler wheel is to the front, the drive sprocket is to the rear and there are no return rollers.

The turret is more egg or pear-shaped than dome-shaped, as with the T-55, and the attached infantry hand rails, if present, are both curved, as opposed to the straight and curved rails on the T-55.

The main IR searchlight is mounted on top of the turret, to the right of the main gun, as with the T-55, with one secondary searchlight mounted below the main light to the right of the gun and one mounted on the commander's cupola on the left side of the turret.

The 115mm smoothbore cannon uses the same trunion arrangement as with the T-55, substituting an armored mantlet for a canvas weather-resistant cover. The cannon has a bore evacuator mounted one third of the way down the gun tube and may be equipped with a thermal sleeve.

The T-62 employs the same coaxial PKT-T 7.62mm machine gun as the T-55 and is mounted to the right of the main gun. The 12.7mm DShK anti-aircraft machine gun is mounted at the loader's station.

As with the T-55, the T-62 does not use armored fuel cells. Instead, the fuel is stored in exposed tanks on the track fenders. The engine exhaust is expelled out the left rear side of the hull. Auxiliary fuel tanks may be attached to the rear of the hull.

T-72 Main Battle Tank

Function: Soviet and Warsaw Pact Cold War main battle tank (MBT).

Description: Where the T-64 was never exported from the Soviet Union the T-72 was a parallel design intended for distribution throughout the Soviet Bloc as well as exported through arms sales to other nations. Similar to the T-64, the T-72 has the low, round turret made from cast steel as well as the 2A46M 125mm smoothbore cannon, which, at the time, was the largest mounted on an MBT. In addition, the T-72 mounts a 12.7mm antiaircraft machine gun in the commander's station and a single 7.62mm machine-gun coaxial to the main gun. Though outclassed by the T-80 and T-90 tanks which followed it, the T-72 is currently still in service with the Russian army as well as being produced for export.

T-80 Main Battle Tank

Function: Current Russian front line main battle tank (MBT).

Description: The T-80 MBT is a continuation of the T-64/T-72 series, retaining many similar features of the previous tanks. It is similar to the T-72 in that it retains the low silhouette, centrally mounted round turret with the commander seated to the right of the main gun and the gunner on the left. As with the T-72 the T-80 retains the use of the automatic loader, feeding ammunition from a 27 round circular magazine around the turret ring. Attached to the hull below the front slope is a toothed dozer blade. Beneath the blade are attachment points for the KMT-6 mine plow. The T-80 is the first Soviet design to incorporate a laser rangefinder as well as a gas turbine engine for increased automotive performance. The T-80 is currently in service with the Russian army and is slowly being replaced by the T-90.

T-90 Main Battle Tank

Function: Latest Russian production Main Battle Tank (MBT).

Description: The T-90 MBT represents a combination of the T-72 and T-80 designs, drawing from the best of both to achieve a more modern product. While the fire control system on the T-90 represents the latest in Russian design and is an improvement over the T-80, the T-90 uses the same V-12 diesel powerplant found in the late model T-72s, sacrificing speed for range and automotive reliability. The T-90 also retains the use of the 125mm smoothbore cannon and automatic loader, feeding ammunition from a 22 round circular magazine around the turret ring. In addition the T-90 continues to use the 9M119 Refleks (NATO AT-11 SNIPER) cannon launched, laser guided ATGM found on the late model T-80s. The T-90 also uses the Shtora-1 countermeasures suite as well as the ARENA hard kill Anti-Missile defensive system. Though currently the most modern tank fielded in the Russian army and available for export, production rates remain low as the T-90 is seen as an interim solution until the next generation of Russian MBT is fielded.

(c) Copyright 2001 Abdur Rahim