|
Now take the bottom piece and place the rough side up.
Place the sides on top and check to see that everything matches up.
Things can be off a bit and it won't matter much. *NOTE* make sure you place the sides on top of the bottom and not beside it. If you try to screw through the side of plywood it will split and not hold plus it fits much better on top. *see pics* (I built my first high-banker the wrong way. It works but would have been much better if i'd thought to do it the right way.) |
|
Now for the fun part. get your handfull of wood
screws .
1. place the sides on a flat surface and put the bottom (smooth side up) on top of them. 2. Get one side to line up on the corner and runn a screw through the bottom piece into the side piece. 3. Line up the rest of the side piece with the edge of the bottom piece and finish placing screws untill the side is secure. 4. repeat the process on the otherside.
|
 |
Now things are starting to look like something. In fact if you wanted
you could use the box just like it is for fine gold just cut a couple boards
to hold down the carpet and you have a fine gold sluice.
click here to fabericate some riffles and put them in. (on to page 3) |
