GARDENING TIMBER              HAND TOOLS PAINT              HOUSE-WARES FIXINGS       

Milford Supplies

  

MENU

CLICK HOME

MILFORD SUPPLIES.com

ADHESIVES and BITUMEN

SPONSORED BY LAYBOND WEB SITE

Milford Supplies sells gap filling adhesives such as Gripfill and solvent free yellow Gripfill.

We also stock LOCTITE DATA SHEETS glues. Click icon for data sheets.

Bitumen paint, Felt-fix, Rufabrush and All weather trowel is made by Aqua Mac.

Download the Laybond Lavinia Bond Screensaver HERE.

 

GRIPFILL - Gap Filling Adhesive
GRIPFILL 

  • Versatile - bonds virtually any two materials

  • Suitable for almost any application, inside and out

  • Incredible bond strength, even in vertical applications

  • Bonds uneven surfaces without difficulty

  • No more drilling and damage problems

  • Reliable - tried and tested for over 20 years

GRIPFIL

ALLWEATHER TROWEL - Bitumen Mastic
Allweather Trowel ALLWEATHER TROWEL is a multi-purpose trowel grade material used for waterproofing, bedding, bonding, pointing, sealing and stopping. It can be used on mastic, asphalt, roofing felt, corrugated iron, fibre cement, slate, lead, copper, concrete and timber.

ALLWEATHER TROWEL is normally applied with a steel trowel or putty knife over a clean, dry surface. It dries to a soft, flexible black coating and remains pliable for some time after application.
RUFABRUSH - Waterproof Coating for Roofs
RUFABRUSH is a contract grade general purpose waterproofing material for use on all common roofing surfaces, including mastic asphalt, roofing felt, corrugated iron, fibre cement, slates, lead, copper and zinc. Once the surface has been prepared and is dry RUFABRUSH is applied to provide the final waterproof coating. Because it cures quickly, RUFABRUSH is resistant to rain and frost during the drying process. It may therefore even be used in these adverse conditions. Rufabrush
BITUMINOUS BLACK PAINT - General Purpose Protective Paint
A solvent-borne bituminous black paint for use as a protective coating over ferrous and non-ferrous metals, concrete, roofing felt, fibre cement, corrugated iron, asphalt and wood.

Surfaces being coated should be thoroughly cleaned and completely dry. Priming will not normally be necessary unless the surface is corroded.

BITUMINOUS BLACK PAINT should not be thinned and is applied using either a brush or spray equipment. It dries to form an odourless and taint-free bitumen film.		 Bituminous Black Paint
FELTFIX - Roofing Felt Adhesive
Feltfix FELTFIX is a cold applied solvent-borne bituminous adhesive for bonding all types of roofing felt.

It is suitable for use over asphalt, felt and metal, although it should not be used over tar based products.

FELTFIX should be applied to a clean, dry and dust free surface using a mop, squeegee or stiff brush. Prime porous or dusty surfaces with SUPER PEN. PRIMER and allow to dry. The felt is then laid into the wet adhesive and rolled as recommended.

<< BACK TO PRODUCTS

[top] [home] [bargains] [products] [directions] [tips] [jokes] [] [feedback] [converter] [games] [directory] [webmaster]

jade2001