| Change |
First production model |
Rear brake supply relocated away
from exhaust |
Straps to secure tool roll and
jack added |
Boot / wheel arch joint modified |
New windscreen |
Revised rear lamp assemblies |
new rear wheel bearing, castings
and outboard drive shafts |
New pedal box and clutch master
cylinder spacer |
New headlamp microswitches and
mounting bracket |
additional welding to stiffen
chassis at rear |
Bonnet counterbalance spring
deleted |
New handbrake pivot |
Modified oil pressure gauge
wiring |
Federal body with negative earth
battery for US market |
modified outer rear wheel
bearings |
New radiator, electric fan. |
federal
body introduced to all markets follow link for more details |
fuel tankbreather hose / body
grommets |
Negative earth battery
introduced to all other markets |
revised handbrake pivot and
operating rods |
failsafe headlamps on Federal
cars |
Outer steering column/body
gasket introduced |
Stromberg Carbs introduced, with
power bulge in bonnet |
Bonnet support frame modified |
rear brake dirt shields fitted |
New Headlight switch on Federal
cars, new headlight lift valve |
modified trough between body
sides and rear suspension housing |
Nyloc bolts replaces Stover or
Philidas suspension bolts |
New headlight vacuum pod
mounting bracket |
revised Lotocone rear suspension
rubber |
revised bodyshell moulding |
modified clutch slave cylinder
hose and mounting bracket |
radiator lowered to increase
bonnet clearance |
bump limiting spacer on rear
suspension introduced |
modified exhaust, new front
flasher sidelamp assembly
|
New differential mounting, drive
coupling, |
revised control box, except on S
types |
+2 S introduced |
Sterring lock introduced |
modified air filter mounting
bracket, washer between rubber mounting of differential |
new voltage stabiliser, ammeter. |
revised boot section moulding |
revised indicator mounting clip |
location of rear lamps modified. |
new radio on UK market cars |
Girling MK2B brake servo
introduced |
New differential mouting bolts |
new headlight microswitches and
mounting bracket |
anti-tilt front seats without
headrests for West German market. |
new glovebox handle, lock, catch
plate |
revised front seat belts |
revised certification tag on
Federal cars. |
revised front suspension springs
and dampers |
Federal +2S introduced |
revised hazard flasher switch |
revised windscreen weatherstrip
upper and lower mouldings on Federal +2S cars |
Last
car on 50/xxxx chassis numbering. New system introduced |
