Technical Specification

Up ] [ Technical Specification ] Performance ] construction ] What came from where ] Front Suspension ] Rear Suspension ] Wheels ] Engine ] Lights ] Production Timeline 1 ] ProductionTimeline Part 2 ] Body Colours ]

 

[History of the +2] [Technical Description] [Photogallery] [Owning a +2] [Site Map] [Bibliography] [Feedback Page]

Technical Specification

 
 Model +2 +2S       +2S 130/4 +2S 130/5
Length 14 feet (4.27 m)
Width 5ft 3.5 inches (1.61m)
Wheelbase 8 feet (2.44m)
Front Track 4 feet 6 inches (1.37m)
Rear Track 4 feet 7 inches (1.4m)
Height 5 feet 3.5 inches (1.61m)
         
Weight lbs 1,882 - 2086 2,086 1954 - 2,086 1,975 - 1,960
         
Steering Rack and pinion steering rack
Turning Circle 34 feet (10.36m)
         
Chassis Mild steel welded chassis, weight 94lb.
Suspension  Front: Independent double wishbones, coil springs, telescopic dampers, anti roll bar
  Rear: Independent lower wishbones, coil springs, telescopic dampers
         
Brakes Servo assisted, 10 inch disks front and rear. Single circuit on early cars. Dual circuit on later cars and Federal models.
         
Engine 1558 cc Twin overhead camshaft, Four cylinder, inline petrol engine  Bore 82.55 stroke 72.75 mm
Twin Carburettor

 

 Weber 40DCOE18 
 Weber 40DCOE31
Stromberg 175CD2S or 175CD2SSE
    Dellorto DHLA40
Gearbox Four Speed manual Five speed manual
         
Clutch. 8 inch diameter 8.5 inch Diameter.
         
 
   Next page