|
Silicon Designs, Inc. |
|
Accelerometer Comparison Chart
Silicon Designs' Accelerometers are built with a high performance, low noise, capacitive sensor. Our custom Digital and Analog ASICs allow us to produce a variety of accelerometer products with outputs, sensitivities, and form factors to fit nearly any application, DC or AC. A rigorous quality control system and the availability of a variety of additional screening options also make our Accelerometers suitable for high reliability applications such as space, military, and the aerospace industry.
Model |
G |
Description |
Power |
Output |
Case |
Termination |
Operating Temp. |
|
|
|||||||
|
SINGLE AXIS ACCELEROMETERS |
|||||||
2 to 200 |
20 Pin Chip Carrier |
+5 Volt |
Digital Pulse Density |
.35"sq. x .11" |
SMD Leadless |
-55oC/+125oC |
|
.35"sq. x .17" |
SMD "J-Lead" |
||||||
5 to 400 |
20 Pin Chip Carrier |
+5 Volt |
Analog Differential ±4V |
.35"sq. x .11" |
SMD Leadless |
-55oC/+125oC |
|
.35"sq. x .17" |
SMD "J-Lead" |
||||||
2 |
20 Pin Chip Carrier |
+5 Volt |
Low
Noise Seismic, |
.35"sq. x .11" |
SMD Leadless |
-40oC/+85oC |
|
.35"sq. x .17" |
SMD "J-Lead" |
||||||
2 to 200 |
Module for 3320 |
+5 Volt |
Digital Pulse Density |
1.0"sq. x .3" |
36" 4 wire cable/plug |
-55oC/+125oC |
|
5 to 200 |
Analog Module |
+5 Volt |
Analog Differential ±4V |
36" 4 wire cable |
-55oC/+125oC |
||
5 to 400 |
+9 to +30V |
-40oC/+85oC |
|||||
Anodized aluminum block used to mount up to three 2010, 2012 or 2210 modules for orthogonal measurement. |
|||||||
M1010 |
2 to 200 |
Modified 1010 for High Reliability Applications |
|||||
M1210 |
5 to 400 |
Modified 1210 for High Reliability Applications |
|||||
|
|
|||||||
| THREE AXIS ACCELEROMETERS | |||||||
5 to 100 |
Open Frame Module |
+5 Volt |
Digital Pulse Density |
1.2"sq. x 1.0" |
Ribbon Connector |
-40oC/+85oC |
|
5 to 100 |
Analog Differential ±4V |
||||||
2 to 200 |
Module Cube for 3320 |
+5 Volt |
Digital Pulse Density |
1.0"sq. x .83" |
39" 6 wire cable/plug |
-55oC/+125oC |
|
5 to 200 |
Module Cube |
+5 Volt |
Analog Differential ±4V |
1.0"sq. x .83" |
39" 8 wire cable |
-55oC/+125oC |
|
5 to 200 |
±11 to ±15V |
±5V Single Ended |
-40oC/+85oC |
||||
|
|
|||||||
| DATA ACQUISITION SYSTEMS - Internal or External Accelerometers | |||||||
2 to 100 |
G-LOGGER |
2 D Cell Batteries |
Download to PC |
3.5" x 4.5" x 2.2" |
DB-9 cable to PC Serial Port |
-20oC/+60oC |
|
External Accel |
|||||||
Cable |
Connects up to three 2010 Accelerometer Modules to 3320 G-LOGGER (not needed to connect 2420 to 3320) |
-40oC/+65oC |
|||||
All Accelerometers have hermetically sealed,
Nitrogen damped, low power, capacitive sensors for DC response as well as vibration
measurements.
G range is specified by -XXX suffix after part number; for example use 1010L-010
for ±10G version of model 1010L.
Standard G ranges include -005=5G; -010=10G; -025=25G; -050=50G; -100=100G;
-200=200G; -400=400G. Non standard GG ranges available.